Student-led poster walk a success at Iowa STEM Summit
News originally published by
Iowa Department Of EducationIowa high school students' passion, creativity and problem-solving took center stage at the 2026 Iowa STEM Summit on Nov. 6 in Des Moines. During the summit's first-ever student poster walk, 19 teams of students shared original research and engineering projects with educators, industry professionals and Iowa STEM partners.
Coordinated by the Iowa Governor’s STEM Advisory Council at the Iowa Department of Education and the Iowa STEM Youth Ambassadors, students presented posters and tri-fold displays on STEM research topics and projects. In sessions throughout the day, they explained their methods, answered questions and received feedback from the professionals and educators who engaged with their posters.
"The poster walk was a fantastic opportunity to highlight the ideas and perspectives of Iowa students," said Justin Lewis, bureau chief for Iowa STEM at the Iowa Department of Education. “These students came up with this idea, pitched it to our leadership group and encouraged others to take part because they are ready to share their work with everyone.”
The projects ranged from neuroscience, cancer research, water filtration, mammography, medical engineering and everyday problem-solving. Regardless of the topics addressed, all projects merged thoughtful research with solutions to real-world problems.
“It’s teaching these students life skills and the soft skills of organizing the poster, being able to put their thoughts completely down and also verbally communicate that to an audience,” said Casey Westrand, Southwest Iowa Regional STEM Manager. “It's also affording them the opportunities to dive deep into potential career opportunities for them.”
For Benjamin Lothamer, a homeschooled student participating in the Mid-Prairie Homeschool Assistance Program, volunteering at a free lunch program revealed a need for affordable prosthetics for upper-limb amputees. While upper-limb amputees account for less than 0.05% of the population, Benjamin noticed that approximately 1% of those he served in the program were upper-limb amputees.
“That's where I started to think kind of how a lot of the people that might need these prosthetics the most are the people who can’t access them,” Benjamin said. “I started looking into the industry, and the cost is about $20,000 to $80,000 on average for high-end devices.”
As a result, many amputees’ only option is to use a device that is nearly a century old, because it is one of the few devices covered by Medicare, Medicaid and private insurance. This antiquated option presents many physical and social challenges for its users.
Faced with this dilemma, Benjamin’s poster detailed his project to design and manufacture a low-cost, accessible prosthetic device using additive manufacturing technology with off-the-shelf, non-proprietary components to reduce cost and production time.
Now in its 34th iteration, Benjamin’s prosthetic hand and wrist can perform all seven primary grip patterns, and by using additive manufacturing technology such as 3D printing, the device can be created in less than 24 hours for under $500.
According to Lothamer, most devices take about eight weeks to manufacture and be delivered to the patient. During that time, patients may experience muscle loss, lose enthusiasm for the prosthetic and become accustomed to living without the limb. As a result, long-term acceptance rates of those devices hovers around 12%. However, if a prosthetic is delivered and placed within 24 hours, they’re 86% more likely to use it long term.
“That one factor of production time alone completely changes the course of their social interactions, employment and pretty much every part of their life,” Benjamin said. “That's really why I started building the hand around using additive manufacturing.”
Directly adjacent to Benjamin in the exhibit hall, a trio of students from Lewis Central High School sought solutions to a problem that vexed one of their favorite activities, bowling. As temperatures fluctuate through the extremes of Iowa’s four seasons, the materials and the composition of their bowling balls also change, resulting in cracks, poor grip and subpar performance, especially during the winter months as balls are shuttled between garages, trunks and the lanes.
To address these issues that can affect competitive bowlers, students Leo Nickman, Ayden Oden and Kamden Capps are using their STEM knowledge to design and manufacture a bag that will protect multiple balls from the elements and support optimal performance across all seasons. As members of Lewis Central’s bowling team, Leo, Ayden and their teammates encounter these issues throughout their season.
“They were kind of challenged with this problem they can relate to, and it just worked out perfectly with this group and their interests,” said Lewis Central technology and engineering instructor Aaron Nickman. “This seems like a real, legitimate problem to go after that they are invested in, and that makes me really excited about it.”
The trio has evaluated existing products on the market that attempt to address this issue and intends to improve on their shortfalls with a three-ball bag that meets their needs.
“This winter we’re going to leave balls in a car, see how cold they get and use that research to see what heating and cooling options we can use to find new solutions,” Ayden said.
The team plans to use heating pads, fans, battery power or vehicle outlets to engineer a solution that keeps their equipment between 68 and 78 degrees at all times.
“There’s thermal dynamics involved and actual manufacturing,” Nickman said. “They're going to have a functional prototype by the end of the school year. It's great when we live in the theoretical, but I want to see them truly end up with a product that they can have and they're going to benefit from after they leave high school.”
While those two projects set out with clear objectives, the poster from Waukee Northwest High School senior Natalie Chanthaphon and Dallas Center-Grimes High School senior Avika Rastogi started with a set of data and images that became ‘Going Bananas for Brains! Volumetric evaluation of basal nuclei and white matter in Capuchin and Saki monkeys.’
Through their internship at Des Moines University, they had access to thousands of MRI scans and images from the brains of Capuchin and Saki monkeys. At the encouragement of DMU’s Dr. Muhammad Spocter, they were encouraged to review and map the images and data, draw their own conclusions and determine where those findings would lead them.
“We could have looked into neurodegenerative diseases or anything else,” Natalie said. “But I thought that if we apply it from an evolutionary basis, it would be so much easier to understand. Human brains are very understudied and difficult to study. If we can understand the basal ganglia and the white matter from such a common ancestor, you would be able to understand humans so much more.”
By reviewing the images and creating 3D models, they mapped the basal nuclei, which handle motor control and reward, and the white matter used for brain connectivity and socialization in both species. While both monkeys displayed similar quantities of basal nuclei, the Capuchin monkey brain has exponentially more white matter volume, supporting its higher intelligence and social complexity.
This difference may reflect an evolutionary divergence between the two species.
“Applying this to humans, we had a hypothetical question of what if humans didn't evolve the way they did,” Natalie said. “What if we evolved the same way as the Saki monkeys did? Would we deal more with conditions such as Huntington's and Parkinson's disease, which deal with your motor control?”
In pursuing this research, both Avika and Natalie stepped well outside the scientific methods they were familiar with using. Avika, a co-leader of the STEM Youth Ambassadors group, previously had extensive experience in robotics.
“I was really intrigued about learning how to use my different problem-solving skills that I've learned from robotics in applying it to research,” Avika said. “We used a software called ITK-SNAP, which medical researchers and scientists use. I've never used anything like that, so learning how to navigate that was pretty interesting.”
In her leadership role as a STEM Youth Ambassador, Avika was instrumental in creating the poster walk and encouraging more students to take an active role in planning and participating in the Iowa STEM Summit, while demonstrating the practical application of what they’ve learned to STEM professionals from across the state.
“Having a way to showcase our work is very motivating,” Benjamin said. “It’s really cool to be able to come here and network with professionals in Iowa. Usually when we present, we’re being judged and graded. This is more of an opportunity to connect with others and share our research.”
During planning for the poster walk, both STEM staff and students were uncertain about the reception the first poster walk would receive. However, students representing the 19 projects spent nearly two hours actively presenting their projects to STEM Summit attendees and engaging in vigorous discussion about their research, earning positive feedback from attendees.
“It is the most amazing experience ever,” Natalie said. “I love talking to people, and I love the idea that science can be so innovative and used as a mechanism for us to move forward together as a society to build each other up. The fact that we get to share this intelligence is so important and so meaningful to me.”
Legal Disclaimer:
EIN Presswire provides this news content "as is" without warranty of any kind. We do not accept any responsibility or liability for the accuracy, content, images, videos, licenses, completeness, legality, or reliability of the information contained in this article. If you have any complaints or copyright issues related to this article, kindly contact the author above.